Aerotech Rocketry E6-RCT (3-Pack)

Required Hardware

The AeroTech Reloadable Motor System RMS is an aluminum cased reusable motor in kit form that is assembled by the user. You will need AeroTech RMS-R/C-24/20-40 motor hardware to build and complete the motor for many reliable flights. Motor hardware is available separately in a complete set, and also as individual parts. Important: Mid Power RMS reload kits are not compatible with High Power RMS products. This RMS motor reload utilizes RCSs exclusive Blue Thunder™ aerospace grade composite propellant formulation, which produces a gorgeous bright violet-blue flame with a minimum of exhaust smoke. Blue Thunder™ motors provide a higher level of thrust than White Lightning™ motors of the same total impulse and are perfect for high lift-off acceleration.

The E6-RCT is a Plugged motor reload. Plugged reload kits do not utilize a motor-actuated delay or ejection charge. Plugged motors must be used in conjunction with a timer, altimeter or radio-activated recovery system. This motor was designed primarily for R/C rocket gliders.

The AeroTech motor reload kit comes with 3 rocket motor reloads. Reload kits include all internal motor components and FirstFire™ Initiators. This AeroTech motor is U.S. mailable with no hazmat fee! 

Certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR) and the Canadian Association of Rocketry (CAR).

• Specifications:

  Motor Diameter: 0.938 inches (24mm)

  Casing Length: 2.75 inches (70mm)

  Hardware Required: RMS-R/C-24/20-40

  Total Impulse: 37.5 N-sec

  Average Thrust: 5.3 newtons

  Peak Thrust: 11.9 N-sec

  Thrust Duration: 7.12 seconds

  Delay Time: Plugged

  Propellant Weight: 21.5 grams

  Motor Weight: 52.7 grams